Konfigurasi Router di Packet Cisco Tracker: Difference between revisions

← Older edit Newer edit →

VisualWikitext

@@ Line 8: / Line 8: @@
 *Pada saat booting pertama kali akan ada pertanyaan seperti berikut
-[[File:Config Router Cisco 1.png|thumb|center]]
+[[File:Config Router Cisco 1.png|thumb|center]]<syntaxhighlight lang="shell">
+Would you like to enter the initial configuration dialog? [yes/no]:
- Would you like to enter the initial configuration dialog? [yes/no]:
+</syntaxhighlight>
 *Tulis <code>no</code>
 *Untuk konfigurasi dasar silahkan ikuti perintah berikut.
 *Masukkan perintah <code>enable</code> untuk berpindah ke exex privilage
- enable
+<syntaxhighlight lang="shell">
+enable
-'''Output'''
+</syntaxhighlight>'''Output'''<syntaxhighlight lang="shell">
- Router>enable
+Router>enable
- Router#
+Router#
+</syntaxhighlight>
 *Masukkan perintah <code>configure terminal</code> untuk masuk ke konfigurasi global.
- configure terminal
+<syntaxhighlight lang="shell">
+configure terminal
-'''Output'''
+</syntaxhighlight>'''Output'''<syntaxhighlight lang="shell">
- Router#configure terminal
+Router#configure terminal
- Enter configuration commands, one per line.  End with CNTL/Z.
+Enter configuration commands, one per line. End with CNTL/Z.
+</syntaxhighlight>[[File:Config Router Cisco 2.png|thumb|center]]
-[[File:Config Router Cisco 2.png|thumb|center]]
 *Setelah configurasi dasar berhasil, kita tinggal atur IP setiap interface. Misal FastEthernet 0/0 <code>192.168.10.254</code>, FastEthernet 1/0 <code>192.168.20.254</code>. Maka bisa menggunakan perintah berikut
 *Ini merupakan perintah untuk melakukan konfigurasi interface FastEthernet 0/0
- interface fa0/0
+<syntaxhighlight lang="shell">
+interface fa0/0
- ip address 192.168.10.254 255.255.255.0
+</syntaxhighlight><syntaxhighlight lang="shell">
+ip address 192.168.10.254 255.255.255.0
- no shutdown
+</syntaxhighlight><syntaxhighlight lang="shell">
+no shutdown
-'''Output'''
+</syntaxhighlight>'''Output'''<syntaxhighlight lang="shell">
- %LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
+%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
+</syntaxhighlight>[[File:Config Router Cisco 3.png|thumb|center]]
-[[File:Config Router Cisco 3.png|thumb|center]]
 *Setelah konfigurasi di interface FastEthernet 0/0, untuk keluar dari interface tersebut silahkan ketik <code>exit</code>
- exit
+<syntaxhighlight lang="shell">
+exit
-'''Output'''
+</syntaxhighlight>'''Output'''<syntaxhighlight lang="shell">
- Router(config-if)#exit
+Router(config-if)#exit
- Router(config)#
+Router(config)#
+</syntaxhighlight>
 *Perhatikan pada saat konfigurasi interface terdapat kata-kata <code>config-if</code>, setelah memasukkan perintah <code>exit</code> berubah menjadi <code>config</code>.
@@ Line 55: / Line 52: @@
 *Ini merupakan perintah untuk melakukan konfigurasi interface FastEthernet 1/0
- interface fa1/0
+<syntaxhighlight lang="shell">
+interface fa1/0
- ip address 192.168.20.254 255.255.255.0
+</syntaxhighlight><syntaxhighlight lang="shell">
+ip address 192.168.20.254 255.255.255.0
- no shutdown
+</syntaxhighlight><syntaxhighlight lang="shell">
+no shutdown
-'''Output'''
+</syntaxhighlight>'''Output'''<syntaxhighlight lang="shell">
- %LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up
+%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up
+</syntaxhighlight>[[File:Config Router Cisco 4.png|thumb|center]]
-[[File:Config Router Cisco 4.png|thumb|center]]
 ==Konfigurasi Komputer==