SMK2024-25/Materi Pelatihan Jaringan

reset router mikrotik

system reset-configuration no-default=y

membuat vlan di interface ether3 (vlan 100, vlan 101, dan vlan 102) interfaces vlan

add vlan-id=100 interface=ether3 name=vlan100
add vlan-id=101 interface=ether3 name=vlan101
add vlan-id=102 interface=ether3 name=vlan102

hubungkan SSID : LAB TJKT 2 password : lab-tjkt2

Membuat password WIFI

wireless security-profile add name=password mode=dynamic-keys tkip=yes authenti=wpa2-psk
wpa2-psk=lab-tjkt2

menghubungkan wlan1 ke wifi LAB TJKT 2

wireless wireless-interface wlan1 set=enable (klik) scan (klik) start (pilih)
LAB TJKT2 (klik) connect.

security-profile=password apply OK.

membuat dhcp-client untuk internet di mikrotik di wlan1

ip dhcp-client add interfaces=wlan1 disabled=no

membuat ip untuk interface dan vlan

ip address
add addr=192.168.20.1/24 interface=ether2
add add=192.168.30.1/24 interface=ether3
add add=10.10.10.1/24 interface=vlan10
add add=10.10.20.1/24 interface=vlan20
add add=10.10.30.1/24 interface=vlan30

membuat NAT

ip firewall nat add chain=srcnat action=masquerade

membuat DHCP-SERVER

ip pool
add name=pool-ether3 ranges=192.168.30.2-192.168.30.254
add name=pool-vlan10 ranges=10.10.10.2-10.10.10.254
add name=pool-vlan20 ranges=10.10.20.2-10.10.20.254
add name=pool-vlan30 ranges=10.10.30.2-10.10.30.254

ip dhcp-server
add name=dhcp-ether3 interface=ether3 address-pool=pool-ether3 disabled=no
add name=dhcp-vlan10 interface=vlan10 address-pool=pool-vlan10 disabled=no
add name=dhcp-vlan20 interface=vlan20 address-pool=pool-vlan20 disabled=no
add name=dhcp-vlan30 interface=vlan30 address-pool=pool-vlan30 disabled=no

ip dhcp-server network
add gateway=192.168.30.1 dns-server=8.8.8.8 address=192.168.30.0/24
add gateway=10.10.10.1 dns-server=8.8.8.8 address=10.10.10.0/24
add gateway=10.10.20.1 dns-server=8.8.8.8 address=10.10.20.0/24
add gateway=10.10.30.1 dns-server=8.8.8.8 address=10.10.30.0/24

KONFIGURASI VLAN DI Mikrotik

membuat bridge untuk ether3, vlan100, vlan101, vlan102

bridge
add name=br-ether3
add name=br-vlan100
add name=br-vlan101
add name=br-vlan102

membuat vlan100, vlan101, vlan102 di ether1

interfaces vlan
add vlan-id=100 interface=ether1 name=vlan100
add vlan-id=101 interface=ether1 name=vlan101
add vlan-id=102 interface=ether1 name=vlan102

mengelompokkan vlan100 dan interfaces

bridge port
add interface=ether2 bridge=br-vlan100
add inteface=vlan100 bridge=br-vlan100
add interface=ether3 bridge=br-vlan101
add inteface=vlan101 bridge=br-vlan101
add interface=ether4 bridge=br-vlan102
add inteface=vlan102 bridge=br-vlan102

KONFIGURASI SWITCH CISCO

membuat vlan 10,20,30

vlan 10
vlan 20
vlan 30

mengkonfigurasi akses vlan 10,20,30

interfaces e0/1
switchport mode access
switchport access vlan 10

interfaces e0/2
switchport mode access
switchport access vlan 20

interfaces e0/3
switchport mode access
switchport access vlan 30

mengkonfigurasi akses trunk di port e0/0

interfaces e0/0
switchport trunk encapsulation dot1q
switchport mode trunk