Cisco Switch: Create VLAN database

Switch>en
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#vlan 10
Switch(config-vlan)#name TKJ
Switch(config-vlan)#ex
Switch(config)#Vlan 20
Switch(config-vlan)#name MM

Asign Vlan nya Ke port:

switch(config)#int f0/1
switch(config-if)#switchport mode access
switch(config-if)#switchport access vlan 10
switch(config)#int f0/2
switch(config-if)#switchport mode access
switch(config-if)#switchport access vlan 10
switch(config)#int f0/3
switch(config-if)#switchport mode access
switch(config-if)#switchport access vlan20
switch(config)#int f0/4
switch(config-if)#switchport mode access
switch(config-if)#switchport access vlan20

Oke Verifikasi nya

Switch(config-if)#do sh vlan
VLAN Name Status Ports
---- -------------------------------- --------- ------------------------- ------
1 default active Fa0/5, Fa0/6, Fa0/7, Fa0/8
                 Fa0/9, Fa0/10, Fa0/11, Fa0/12
                 Fa0/13, Fa0/14, Fa0/15, Fa0/16
                 Fa0/17, Fa0/18, Fa0/19, Fa0/20
                 Fa0/21, Fa0/22, Fa0/23, Fa0/24
10 TKJ    active Fa0/1, Fa0/2
20 MM     active Fa0/3, Fa0/4
1002 fddi-default act/unsup
1003 token-ring-default act/unsup
1004 fddinet-default act/unsup
1005 trnet-default act/unsup