Jaringan Komputer:Tugas 1
| Note: | Silahkan ganti IP address 10.0.0.0 s/d 10.255.255.255 menjadi 192.168.0.0 s/d 192.168.255.255 |
Hanya untuk orang yang suka menggunakan CLI, karena bisa di copas :)
Konfigurasi Static
Router 0
<syntaxhighlight lang="bash" line="1"> Router>enable Router#configure terminal Router(config)#interface fa1/0 Router(config-if)#ip address 10.10.30.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#interface fa0/0 Router(config-if)#ip address 10.10.40.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#ip route 10.10.20.0 255.255.255.0 10.10.30.2 Router(config)#ip route 10.10.10.0 255.255.255.0 10.10.40.2 </syntaxhighlight>
Router 1
<syntaxhighlight lang="bash" line="1"> Router>enable Router#configure terminal Router(config)#interface fa0/0 Router(config-if)#ip address 10.10.40.2 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#interface fa1/0 Router(config-if)#ip address 10.10.10.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#interface se9/0 Router(config-if)#ip address 10.10.50.2 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#ip route 10.10.20.0 255.255.255.0 10.10.40.1 Router(config)#ip route 10.10.20.0 255.255.255.0 10.10.50.1 </syntaxhighlight>
Router 2
<syntaxhighlight lang="bash" line="1"> Router>enable Router#configure terminal Router(config)#interface fa0/0 Router(config-if)#ip address 10.10.30.2 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#interface fa1/0 Router(config-if)#ip address 10.10.20.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#interface se9/0 Router(config-if)#ip address 10.10.50.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#ip route 10.10.10.0 255.255.255.0 10.10.30.1 Router(config)#ip route 10.10.10.0 255.255.255.0 10.10.50.2 </syntaxhighlight>
Konfigurasi Dynamis
Router1
<syntaxhighlight lang="bash" line="1"> Router>enable Router#configure terminal Router(config)#interface fa1/0 Router(config)#ip address 192.168.10.1 255.255.255.0 Router(config)#interface fa1/0 Router(config-if)#ip address 192.168.10.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#router rip Router(config-router)#network 192.168.10.0 Router(config-router)# Router(config-router)# Router(config-router)#end Router#configure terminal Enter configuration commands, one per line. End with CNTL/Z. Router(config)#router rip Router(config-router)# %SYS-5-CONFIG_I: Configured from console by console
Router(config-router)#end Router#configure terminal Enter configuration commands, one per line. End with CNTL/Z. Router(config)# Router(config)# %SYS-5-CONFIG_I: Configured from console by console
Router(config)#router rip Router(config-router)# Router(config-router)# Router(config-router)# Router(config-router)#end Router#configure terminal Enter configuration commands, one per line. End with CNTL/Z. Router(config)#interface FastEthernet1/0 Router(config-if)# %SYS-5-CONFIG_I: Configured from console by console
Router(config-if)#exit Router(config)#ip dhcp pool network010168192 Router(dhcp-config)#network 192.168.10.0 255.255.255.0 Router(dhcp-config)#exit Router(config)# Router(config)# Router(config)#interface FastEthernet1/0 Router(config-if)# Router(config-if)#ip dhcp pool network010168192 Router(dhcp-config)#default-router 192.168.10.1 Router(dhcp-config)#exit Router(config)#ip route 192.168.20.0 255.255.255.0 192.168.30.2 Router(config)#ip route 192.168.20.0 255.255.255.0 192.168.50.1 Router(config)#interface fa0/0 Router(config-if)#ip address 192.168.30.1 % Incomplete command. Router(config-if)#ip address 192.168.30.1 255.255.255.0 Router(config-if)#no shutdown
Router(config-if)# %LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
Router(config-if)#exit Router(config)#interface se9/0 Router(config-if)#ip address 192.168.50.2 255.255.255.0 Router(config-if)#no shutdown
%LINK-5-CHANGED: Interface Serial9/0, changed state to down Router(config-if)# </syntaxhighlight>