Jaringan Komputer:Tugas 1

Note:

Silahkan ganti IP address 10.0.0.0 s/d 10.255.255.255 menjadi 192.168.0.0 s/d 192.168.255.255

Pohon jaringan

Hanya untuk orang yang suka menggunakan CLI, karena bisa di copas :)

Konfigurasi Static

Router 0

Router>enable
Router#configure terminal
Router(config)#interface fa1/0
Router(config-if)#ip address 10.10.30.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fa0/0
Router(config-if)#ip address 10.10.40.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#ip route 10.10.20.0 255.255.255.0 10.10.30.2
Router(config)#ip route 10.10.10.0 255.255.255.0 10.10.40.2

Router 1

Router>enable
Router#configure terminal
Router(config)#interface fa0/0
Router(config-if)#ip address 10.10.40.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fa1/0
Router(config-if)#ip address 10.10.10.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface se9/0
Router(config-if)#ip address 10.10.50.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#ip route 10.10.20.0 255.255.255.0 10.10.40.1
Router(config)#ip route 10.10.20.0 255.255.255.0 10.10.50.1

Router 2

Router>enable
Router#configure terminal
Router(config)#interface fa0/0
Router(config-if)#ip address 10.10.30.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fa1/0
Router(config-if)#ip address 10.10.20.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface se9/0
Router(config-if)#ip address 10.10.50.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#ip route 10.10.10.0 255.255.255.0 10.10.30.1
Router(config)#ip route 10.10.10.0 255.255.255.0 10.10.50.2

Konfigurasi Dynamis

Router 0

Router>enable
Router#configure terminal
Router(config)#interface fa1/0
Router(config-if)#ip address 10.10.40.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fa0/0
Router(config-if)#ip address 10.10.30.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#ip route 10.10.10.0 255.255.255.0 10.10.40.1
Router(config)#ip route 10.10.20.0 255.255.255.0 10.10.30.1

Router1

Router>enable
Router#configure terminal
Router(config)#interface fa1/0
Router(config)#ip address 192.168.10.1 255.255.255.0
Router(config)#interface fa1/0
Router(config-if)#ip address 192.168.10.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#router rip
Router(config-router)#network 192.168.10.0
Router(config-router)#
Router(config-router)#
Router(config-router)#end
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#router rip
Router(config-router)#
%SYS-5-CONFIG_I: Configured from console by console

Router(config-router)#end
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#
Router(config)#
%SYS-5-CONFIG_I: Configured from console by console

Router(config)#router rip
Router(config-router)#
Router(config-router)#
Router(config-router)#
Router(config-router)#end
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#interface FastEthernet1/0
Router(config-if)#
%SYS-5-CONFIG_I: Configured from console by console

Router(config-if)#exit
Router(config)#ip dhcp pool network010168192
Router(dhcp-config)#network 192.168.10.0 255.255.255.0
Router(dhcp-config)#exit
Router(config)#
Router(config)#
Router(config)#interface FastEthernet1/0
Router(config-if)#
Router(config-if)#ip dhcp pool network010168192
Router(dhcp-config)#default-router 192.168.10.1
Router(dhcp-config)#exit
Router(config)#ip route 192.168.20.0 255.255.255.0 192.168.30.2
Router(config)#ip route 192.168.20.0 255.255.255.0 192.168.50.1
Router(config)#interface fa0/0
Router(config-if)#ip address 192.168.30.1
% Incomplete command.
Router(config-if)#ip address 192.168.30.1 255.255.255.0
Router(config-if)#no shutdown

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

Router(config-if)#exit
Router(config)#interface se9/0
Router(config-if)#ip address 192.168.50.2 255.255.255.0
Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface Serial9/0, changed state to down
Router(config-if)#

Router2

Router>enable
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#interface fa1/0
Router(config-if)#ip address 192.168.20.1 255.255.255.0
Router(config-if)#no shutdown

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to up

Router(config-if)#exit
Router(config)#interface fa0/0
Router(config-if)#ip address 192.168.40.1 255.255.255.0
Router(config-if)#no shutdown

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

Router(config-if)#exit
Router(config)#interface se9/0
Router(config-if)#ip address 192.168.50.1 255.255.255.0
Router(config-if)#no shutdown

Router(config-if)#
%LINK-5-CHANGED: Interface Serial9/0, changed state to up

Router(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial9/0, changed state to up

Router(config-if)#exit
Router(config)#ip dhcp pool network020168192
Router(dhcp-config)#network 192.168.20.0 255.255.255.0
Router(dhcp-config)#default-router 192.168.20.1
Router(dhcp-config)#exit
Router(config)#ip route 192.168.10.0 255.255.255.0 192.168.40.2
Router(config)#ip route 192.168.10.0 255.255.255.0 192.168.50.2
Router(config)#ip dhcp pool network020168192
Router(dhcp-config)#network 192.168.20.0 255.255.255.0
Router(dhcp-config)#default-router 192.168.20.1
Router(dhcp-config)#exit
Router(config)#

Source

• blogspot.com